How To Take Care Of Your Car’s Interior

When we are buying a new car, we put a lot of emphasis on the interior and exterior looks. Once we have bought it, we forget to maintain them resulting in the car looking like a 10 year old model.

Cleaning the car will just take few hours in a week and keep it shining forever. Exteriors are not the only part to clean, even the upholstery and dashboard of the car needs regular cleaning.

Tips to keep the interiors of the car perfect

1. Buy a good vacuum cleaner with long and flexible necks. You can easily clean the interiors with a vacuum and save lot of time.

2. Do not forget to take out the floor mats and clean them. Occasionally, you can wash them with water as well.

3. Clean the dashboard with slight damp microfiber towel. You can periodically polish the dashboard with appropriate wax.

4. There are lot of sun UV rays protectant which can also be applied. They can be applied on the leather seat as well as the dashboard.

5. Use a nice refreshing perfume or car freshener to give a pleasant effect once someone is seating in a car.

6. Do not forget to clean the door panels, storage area and the arm rest. You can clean them with sponge and soapy water.

7. Clean the leather cover with the specifically-designed cleaner. This will make the leather last long and protect from cracking.

8. Final task is to clean the window glasses with the cleaner.

Read More

How To Take Care Of Your Car’s Exteriors

When we are buying a new car, we put a lot of emphasis on the interior and exterior looks. Once we have bought it, we forget to maintain them resulting in the car looking like a 10 year old model.

Cleaning the car will just take few hours in a week and keep it shining forever. Exteriors are not the only part to clean, even the upholstery and dashboard of the car needs regular cleaning.

Tips to take care of exteriors of the car

1. Use a quality car wash cleaner and clean the car with soft and clean sponge to avoid any scratches.

2. While waxing the car, do it under the shade. Sunlight can harden the wax giving it an inconsistent and streaky finish.

3. Go to service station to give a pressure type cleaning once a month. This is one of the best kept secrets of the envious shining car owners.

4. Apply correct amount of good quality wax. Using more wax will not make the car shine more, but will damage the look of the car.

5. Regularly rotate the tires to even out their wear and tear.

6. Be sure to clean the tires and the rim with a hose pipe.

7. It is commonly seen that people avoid the maintenance of the wipers and don’t change them frequently. This results in scratches on the windscreen. Regularly cleaning the wipers with a dry soft cloth will increase the life of wipers.

8. Avoid using wiper in case you notice dried leaves or dust on the windscreen to prevent any scratches.

9. Be sure to touch up the areas with small scratches or spots to prevent any rusting.

10. To clean the bird dropping, first soak them in water for few minutes, and then remove them with a towel. You can use wax to remove any spot left by it.

11. In case you don’t have garage, don’t keep the car under harsh weather for long periods. Buy a good quality cover to stop the deterioration of the car paint.

Remember if you treat the car like your baby, it will be a star sitting in your garage.

Read More

Compound and Polish Plus Wax

You could clearly see the amount of swirls and Random Deep Scratches (RDS) in the paint under even natural daylight. Apparently under artifical light it looked absolutely shocking.

The Menzerna Polishing Pad in combination with the Menzerna Intensive Polish is a fantastic combo and comes highly recommended for correction on a wide range of paints. The only downside is they aren’t the most durable pad with one typically lasting long enough to polish 1 or 2 cars.

Using 4 pea sized amounts of product, the machine was started on speed 1 to spread the polish before being increased to speed 5 for the majority of the correction. Using a slow overlapping movement the compound was worked until it had fully broken down. It takes about 5 minutes to fully break down Menzerna with a dual Action polisher and you can tell when it’s broken down as it almost dissapears into the paint just before it starts to dry.

The process was repeated so in total this was the result of two complete hits with the machine using the process described above.

As you can see for 10 minutes work it was possible to completely transform the paint to virtually the same level as when it rolled out of the factory. Normally the area would be refined again once fully corrected with a finishing polish and sealed with a wax. This is another area the polisher really excels but we’ll leave that for another day.

Read More

How To Cleaning Car Mat or Carpet

Carpet Cleaning
You can't have a clean interior if you forget about the carpet. Spots and stains like these need special attention.
















Vacuum The Carpet

Vacuum the carpet to pick up all the loose dirt and french fries.

















Treat With A Stain Lifter

Spray the spots with the stain lifter. You'll want to really soak them.

















Scrub And Repeat

Scrub the dirtiest spots with a plastic bristle brush. You may have to repeat the application on stubborn spots.
















A Clean Cloth

Wipe up the lifted residue with a clean cloth.


















Vacuum Carpet Again

Vacuum the carpet again after the cleaner dries.


















Its Work!

All Done! This old car's carpet looks much better now!

Read More

How Does Polished and Wax Work Out

Wash the whole car body in advance so that you could remove the dust and dirt. When the iron powder and too much wax adhere, remove them with “Fur Remover”, wash way and wipe away completely. And then stick the masking tape.

Polishing the body and please adjust the power to press by hand and the dial of the polisher itself according to the scale

We use EASIEST MIRROR on Special Long Wool Buffing and evenly polish, lengthwise and crosswise, confirming that the scale is disappearing. and it need to change or wash the buffing if the effects of buffing is weakened by the fur in the process of polishing. You need three clean pieces of buffing to treat the whole body.

After polishing, thoroughly wipe the remaining abrasives away with MICRO FIBER CLOTH wrung dry. And follow the process 2)~3) again to complete the whole car body.

Use PLUS Wax on Special Urethane Buffing and evenly Waxing, lengthwise and crosswise, confirming that the small waxing scale, which Easiest Mirror put is disappearing.

After waxing, thoroughly wipe the remaining abrasives away with MICRO FIBER CLOTH with dry. Then be careful not to put the wiping scale. And follow the process 4)~5) again to complete the whole car body.

You can make the surface of car body shine like a mirror in ONLY ONE PROCESS with our polish and wax.

Read More

Japan's Nano Coating - 8500 Glass Coating

What is 8500 Glass coating for cars like? 

It has an unique characteristic different from a general organic resin, because siloxane bond that consists of silicon (Si) and oxygen (O) is the main backbone, and there is organic methyl radical in side chain.

1)The surface of the car body is filmed firmly ,and so the small blemish doesn't adhere easily.

2)It is not deteriorated by ultraviolet rays, and is excellent in weather resistance.

3)NO NEED MORE WAX for 5 years!!! Coated with a glaze once you use this product.

4)It is water-repellent processed and makes the surface smooth, and as a result prevents the fur from adhering.

Before execution of works

The fur and scale have adhered on the body,and there is no gloss on it.

*Please wash the whole body of the car in order to remove the dust.

Polish for preparations

First,masking tapes must be sticked in case the fur should adhered on the glass,the resin and the rubber of the car body when polished.After that,the body is polished by using Wool Buffing or Sponge Buffing,which depends on the painting itself of the car body.And then the fur and waterspots will be removed,and the surface of the car body will be like the mirror.

Applying this 8500 Glass Coating

Masking tapes must be come off and we get our product "MICRO FIBER CLOTH" wet,and this cloth squeezes enough.Then you can wipe away abrasive and dust adhering on the car body.After that,we soak this 8500 Glass Coating in the Special Cloth for this product(*It's better to fold this Special Cloth up six times.), and apply 8500 Glass Coating and wipe away.

Wipe away

Wipe away on the bonnet by using "THREE" "DRY" Micro Fiber Cloths.

First,wipe away lengthwise and breadthwise with care by using one Micro Fiber Cloth.

Second,wipe away with more care by using another one so that there will be no 8500 Glass Coating left on the bonnet.

Finally,wipe away completely by using the other one, checking the surface of the bonnet.

The half is finished

After wiping away three times,you should take the visual examination, from every angle, of whether there is no 8500 Glass Coating left or not.Please wipe away again if there is some left.Dry the car body for about 2hours.And follow the process 3)~5) one more time.It's necessary to apply this 8500 Glass Coating TWICE on the car body.It takes one week that the coating on the car body will harden enough.So don't wash the car and wipe with a dry cloth during the period.

Read More

Claying Detailing

What is Claying?

Claying / Clay Bar is a process used to remove paint contaminants on the paint such as bugs, tar, road grime, fallout, tree sap, some paint over spray, and other contaminants that washing cannot remove. The Clay Process actually cleans below the paint surface to remove the contaminants that grip to the paint. 

Does your car need the clay bar process before a detail? 

YES! Claying is one of the most important steps in cleaning the paint, and actually cleans the paint better than a wash alone. It cleans deep into scratches and pits and removes deep lodged dirt that may have been there for the life of the vehicle. There is no other way of cleaning a car as thorough as claying.

A car clay bar is an essential car detailing tool that targets the common enemy of every car finish: pollution that causes automotive paint contamination. It relentlessly pursues your car from the second it leaves the factory until your car meets its ultimate demise. It's in the air we breathe, it's on the roads we drive, and it attaches to your car's paint, where it bonds and begins a process of oxidation.

Surface contamination, as shown by this diagram, is difficult to clean or polish off, yet paint cleaning clay removes it with ease.

When contaminants get a solid grip on your car's paint, washing alone may not be enough to remove them. Pre-wax cleaners also may not be able to exfoliate large particles.

In this case, you have two choices: use a polishing compound, which removes a lot of paint material, or use a clay bar. A clay bar isn't a polish or a compound, it is asurface preparation bar that smoothes the paint and exfoliates contaminants.

HOW DOES DETAILING CLAY WORK?

Clay removes above-surface bonded contamination through the mechanical action of the clay bar rubbing against the vehicle surface. Detailing clay abrades the contamination, wearing it down in some cases, as a result of this mechanical action. However, detailing clay is not abrasive to the paint. The use of an approved clay lubricant prevents marring of the paint. The removed contamination sticks to the clay and is removed from the paint

CAR CLAY BAR FORMULATIONs

Detailing clay formulation determines the optimal function of the clay and its potential to do damage when used improperly.

As an example, a professional grade clay bar that’s designed to remove paint overspray is very firm and contains abrasives equivalent to heavy rubbing compound. Used properly it will remove heavy overspray without damaging the paint. Used improperly, it can leave some pretty significant surface marring. That’s why it’s a professional product.

CLAY MAGIC ERASER BAR LIGHT DUTY

Fine grade clay is formulated to remove surface contamination without an aggressive approach, leaving a clean slick smooth surface. Universal for all colors, Recomended especially for Darker Colors. 8 oz bar.

CLAY MAGIC ERASER BAR MEDIUM DUTY

Medium grade clay is the most aggressive clay available. Suitable for more serious surface contaminants and will leaves the cars painted finish as slick as glass. Removes fallout, tree sap, bird droppings and of course paint overspray. The easiest way to describe what the clay does is it cleans all the dirt out of the pores of the paint, thus giving you a glassy slick feeling. Ready for Wax or Teflon. Recommended for Light Colored cars. 8 oz bar.

Read More

Why Do We Need Car Detailing - Benefits

Let’s we share the BENEFITS ....

Some think detailing is a luxury but in fact it should be considered regular maintenance. Having your car detailed will keep the paint in excellent condition. Without a coat of wax on your vehicle your car is exposed to harmful UV rays, road grime, salt, acid rain etc. which can cause your paint to oxidize and over time corrode and rust. By having your car detailed a few times per year you can drastically increase the resale value of your car. On average an interior and exterior detail can increase the resale value by 10% to 15%.

Dirty windows and mirrors can severely decrease visibility especially when the sun is shining directly onto your windscreen. Streak marks can create a haze that decreases visibility at night. A carefull detailing of the glass surfaces helps to eliminate this hazard as well as making your visibilty in the rain much better thanks to the rain reppeling coating that is applied.

Oxidized cloudy headlights can damper the brightness of your headlights by as much as 80%. Detailing away contaminants and a restored suface protection can help maintain the clarity of headlight lenses.

A clean, good looking car always leaves people with a good impression. It shows that you take pride in the things that you do and that you look after the major things in your life. If your vehicle is used for business then it's imperative that you keep it clean. This is the face of your business. If you don't respect it then what's the likelihood that you'll respect your client.

Having your car professionally detailed will make it potentially easier to sell your car and get a higher price. A dirty car suggests to a potential owner that you don't really care about the car and if you couldn't keep it clean, what's the likelihood that you looked after all the other parts of the car. When it comes to selling something, image is everything (well, at least it's a big factor).

Read More

Wheel Rims Cleaning and Shine

Road grime and brake dust stuck fast on the racy alloy rims - that hurts every car owner. It will also damage the rims: Sooner or later, these aggressive residues will eat through the lacquer coating. This leaves ugly discolouration, which is also extremely difficult to remove. In order for the tyres to look fresh and shine, they require regular cleaning and individual care.

1. Spray on Rim Cleaner

SONAX Xtreme Rim Cleaner gets into the farthest corners and dissolves even extreme dirt, it is also exceptionally gentle on materials.
For especially stubborn grime, we recommend follow up work with the enclosed special brush.

2. Rinsing

Rinse off thoroughly with a strong water jet and wipe the wheel rims dry.

3. Spray on Tyre Care

Gleaming rims and dull looking tyres - that's no good. Better is: For deep black, silky shining tyre surfaces, simply spray on SONAX Tyre Care, and allow to work in, finished.

Sport Rims Before Polish

Sport Rims After Polish

Wheel Rims With Watermarks

Wheel Rims With Watermarks

Wheel Rims After Removal

Wheel Rims After Removal

Read More

Japan's Nano Coating - ION Nano Coating

Japan Nano ION Coating is Japanese technology that effect lasts up until 6 months and improve Water repellent!

This innovative water repellent nano-coating for furniture protects them from water, dirt, contamination and stains – whilst remaining totally invisible!
It will not affect the appearance, its ability to breath, its colour or handle and is easy to maintain.

Nano-coatings are exceedingly water-resistant on outdoor materials; keeping them drier longer. Oil, dirt and other frequent stains belong to the past, if the material is treated with our protective products.

Before ION Nano Coating

After ION Nano Coating

Zoom After ION Nano Coating

The new nano-coating has numerous potential applications including the creation of cars that less frequently need to be wash your car and repainting the body. Think of all the water and could be saved – not to mention all the time!

Asaki Water Coating Before and After

The Difference of Without and With Asaki Water Coating

Read More

Nano Coatings for Car Windscreen

Windscreen Without Rain Away

Bad weather is the nightmare of every driver out there, although we must admit that we feel a guilty pleasure when we’re forced to drive under heavy rain.

As you know, each car out there must, or at least should, be equipped with the almighty trio that should help them stay on the side side in 99 percent of the cases: a clean windshield, an effective set of wipers and windscreen washer fluid.

That’s why it all came down to simple watter repellent products that are, in essence, a very simple substance which needs to be applied on a windshield in order to improve visibility and thus do the same thing as a stand-alone windscreen tweaked in this regard.

If you’re wondering about how much it lasts, it again varies by product. Some of them could go for more than a month, while others are able to force the water to bead and shed off the glass only for a couple of weeks. And yes, you can still wash your car and use any type of washing fluid, chances are that the water repeller won’t be affected.

Having a look on the ingredients used by a windshield water repellent product proves that it’s pretty easy to create your very own substance at home.

Read More