Click the image to enlarge.
Showing posts with label Before and After. Show all posts
Showing posts with label Before and After. Show all posts
Our Work
Click the image to enlarge.
Compound and Polish Plus Wax
You could clearly see the amount of swirls and Random Deep Scratches (RDS) in the paint under even natural daylight. Apparently under artifical light it looked absolutely shocking.
The Menzerna Polishing Pad in combination with the Menzerna Intensive Polish is a fantastic combo and comes highly recommended for correction on a wide range of paints. The only downside is they aren’t the most durable pad with one typically lasting long enough to polish 1 or 2 cars.
Using 4 pea sized amounts of product, the machine was started on speed 1 to spread the polish before being increased to speed 5 for the majority of the correction. Using a slow overlapping movement the compound was worked until it had fully broken down. It takes about 5 minutes to fully break down Menzerna with a dual Action polisher and you can tell when it’s broken down as it almost dissapears into the paint just before it starts to dry.
The process was repeated so in total this was the result of two complete hits with the machine using the process described above.
As you can see for 10 minutes work it was possible to completely transform the paint to virtually the same level as when it rolled out of the factory. Normally the area would be refined again once fully corrected with a finishing polish and sealed with a wax. This is another area the polisher really excels but we’ll leave that for another day.
The Menzerna Polishing Pad in combination with the Menzerna Intensive Polish is a fantastic combo and comes highly recommended for correction on a wide range of paints. The only downside is they aren’t the most durable pad with one typically lasting long enough to polish 1 or 2 cars.
Using 4 pea sized amounts of product, the machine was started on speed 1 to spread the polish before being increased to speed 5 for the majority of the correction. Using a slow overlapping movement the compound was worked until it had fully broken down. It takes about 5 minutes to fully break down Menzerna with a dual Action polisher and you can tell when it’s broken down as it almost dissapears into the paint just before it starts to dry.
How To Cleaning Car Mat or Carpet
Carpet Cleaning
You can't have a clean interior if you forget about the carpet. Spots and stains like these need special attention.
Vacuum The Carpet
Vacuum the carpet to pick up all the loose dirt and french fries.
Treat With A Stain Lifter
Spray the spots with the stain lifter. You'll want to really soak them.
Scrub And Repeat
Scrub the dirtiest spots with a plastic bristle brush. You may have to repeat the application on stubborn spots.
A Clean Cloth
Wipe up the lifted residue with a clean cloth.
Vacuum Carpet Again
Vacuum the carpet again after the cleaner dries.
Its Work!
All Done! This old car's carpet looks much better now!
You can't have a clean interior if you forget about the carpet. Spots and stains like these need special attention.Vacuum The Carpet
Vacuum the carpet to pick up all the loose dirt and french fries.
Treat With A Stain Lifter
Spray the spots with the stain lifter. You'll want to really soak them.
Scrub And Repeat
Scrub the dirtiest spots with a plastic bristle brush. You may have to repeat the application on stubborn spots.
A Clean Cloth
Wipe up the lifted residue with a clean cloth.
Vacuum Carpet Again
Vacuum the carpet again after the cleaner dries.
Its Work!
All Done! This old car's carpet looks much better now!
How Does Polished and Wax Work Out
Wash the whole car body in advance so that you could remove the dust and dirt. When the iron powder and too much wax adhere, remove them with “Fur Remover”, wash way and wipe away completely. And then stick the masking tape.
We use EASIEST MIRROR on Special Long Wool Buffing and evenly polish, lengthwise and crosswise, confirming that the scale is disappearing. and it need to change or wash the buffing if the effects of buffing is weakened by the fur in the process of polishing. You need three clean pieces of buffing to treat the whole body.
Use PLUS Wax on Special Urethane Buffing and evenly Waxing, lengthwise and crosswise, confirming that the small waxing scale, which Easiest Mirror put is disappearing.
Japan's Nano Coating - 8500 Glass Coating
What is 8500 Glass coating for cars like?
It has an unique characteristic different from a general organic resin, because siloxane bond that consists of silicon (Si) and oxygen (O) is the main backbone, and there is organic methyl radical in side chain.
1)The surface of the car body is filmed firmly ,and so the small blemish doesn't adhere easily.
2)It is not deteriorated by ultraviolet rays, and is excellent in weather resistance.
3)NO NEED MORE WAX for 5 years!!! Coated with a glaze once you use this product.
4)It is water-repellent processed and makes the surface smooth, and as a result prevents the fur from adhering.
*Please wash the whole body of the car in order to remove the dust.
Polish for preparations
First,masking tapes must be sticked in case the fur should adhered on the glass,the resin and the rubber of the car body when polished.After that,the body is polished by using Wool Buffing or Sponge Buffing,which depends on the painting itself of the car body.And then the fur and waterspots will be removed,and the surface of the car body will be like the mirror.
Applying this 8500 Glass Coating
Wipe away
Second,wipe away with more care by using another one so that there will be no 8500 Glass Coating left on the bonnet.
Finally,wipe away completely by using the other one, checking the surface of the bonnet.
The half is finished
After wiping away three times,you should take the visual examination, from every angle, of whether there is no 8500 Glass Coating left or not.Please wipe away again if there is some left.Dry the car body for about 2hours.And follow the process 3)~5) one more time.It's necessary to apply this 8500 Glass Coating TWICE on the car body.It takes one week that the coating on the car body will harden enough.So don't wash the car and wipe with a dry cloth during the period.
1)The surface of the car body is filmed firmly ,and so the small blemish doesn't adhere easily.
2)It is not deteriorated by ultraviolet rays, and is excellent in weather resistance.
3)NO NEED MORE WAX for 5 years!!! Coated with a glaze once you use this product.
4)It is water-repellent processed and makes the surface smooth, and as a result prevents the fur from adhering.
Before execution of works
The fur and scale have adhered on the body,and there is no gloss on it.
*Please wash the whole body of the car in order to remove the dust.
Masking tapes must be come off and we get our product "MICRO FIBER CLOTH" wet,and this cloth squeezes enough.Then you can wipe away abrasive and dust adhering on the car body.After that,we soak this 8500 Glass Coating in the Special Cloth for this product(*It's better to fold this Special Cloth up six times.), and apply 8500 Glass Coating and wipe away.
Wipe away on the bonnet by using "THREE" "DRY" Micro Fiber Cloths.
First,wipe away lengthwise and breadthwise with care by using one Micro Fiber Cloth.Second,wipe away with more care by using another one so that there will be no 8500 Glass Coating left on the bonnet.
Finally,wipe away completely by using the other one, checking the surface of the bonnet.
The half is finished
Wheel Rims Cleaning and Shine
For especially stubborn grime, we recommend follow up work with the enclosed special brush.
Sport Rims Before Polish
Sport Rims After Polish
Wheel Rims With Watermarks
Wheel Rims With Watermarks
Wheel Rims After Removal
Wheel Rims After Removal
Japan's Nano Coating - ION Nano Coating
Japan Nano ION Coating is Japanese technology that effect lasts up until 6 months and improve Water repellent!
This innovative water repellent nano-coating for furniture protects them from water, dirt, contamination and stains – whilst remaining totally invisible!
It will not affect the appearance, its ability to breath, its colour or handle and is easy to maintain.
Nano-coatings are exceedingly water-resistant on outdoor materials; keeping them drier longer. Oil, dirt and other frequent stains belong to the past, if the material is treated with our protective products.
Before ION Nano Coating
After ION Nano Coating
Zoom After ION Nano Coating
The new nano-coating has numerous potential applications including the creation of cars that less frequently need to be wash your car and repainting the body. Think of all the water and could be saved – not to mention all the time!
Asaki Water Coating Before and After
The Difference of Without and With Asaki Water Coating
